Transcript TIP73 - keytechtools.com

First you access Vag and select
<<Instrument Can>>
You are prompted to select the kind, click VDO with NEC.
Select the option to “Enter Service Mode by OBDII”
selected after “Read Immo Data”
After reading the
immo, shown the
following data.
After reading the immo, you need to
connect the antenna and put the
transponder to program and then click
"Add key".
Select the position of the new key, it is best to select the
last position.
Write the new transponder and
the following code appears:
Finally select “Update Immo Data”. Then turn on the vehicle
with a new transponder.
Done!!!
CENTRAL TIME: 9 TO 2 PM:
JONATHAN
SALES@KEYTECHTOOLS.COM
ORLANDO TIME: 9 TO 5 PM:
CLAUDIA
CLAUDIA@KEYTECHTOOLS.COM
407-620-1787
VEGAS TIME: 9 TO 5 PM:
MARIN POPA
MARIN@KEYTECHTOOLS.COM
702-494-8404
CENTRAL TIME: 9 TO 2 PM:
CESAR
CESAR@KEYTECHTOOLS.COM
001 (239) 234 44 90